Powder Coating Plants
Conveyorised Powder Coating Plant
Automated plant that moves items on a continuous conveyor through each stage of the powder coating process.
Powder Coating Plants
Powder Curing Oven
Batch curing ovens that bake and level sprayed powder into the final coating — electric, LPG, natural gas or diesel heating.
- Heating Source
- Electric / LPG / natural gas / diesel (model dependent)
- Working Temperature
- 180 °C typical; max. 250 °C (up to 400 °C on selected model)
- Temperature Stability
- < ±3–5 °C
- Heat-up Time
- 15–30 min (at 180 °C)
Overview
After powder is sprayed in the spray booth, the workpiece is placed in the oven for curing. The powder is cured by high-temperature baking and levelling, becoming the final coating with its intended finish.
Ovens are built with galvanised steel and rock-wool insulated wall panels, with forced air circulation through vertical and variable perforations in the walls. Size, colour and specifications can be customised to your requirements.
Key Features
- Heating by electricity, LPG, natural gas or diesel (depending on model)
- Rock-wool insulated wall panels, 100–150 mm thick
- Forced air circulation through vertical and variable wall perforations
- Control system with LED display to set temperature and curing time
- Trolley, overhead track or rail transport options
- Size, colour and specifications customised to your requirements
Available Configurations
- Working size 1200 × 1000 × 1800 mm (D × W × H) — 9 kW heating, 0.55 kW fan, 180–400 °C, ventilation 805–1677 m³/h, mobile trolley
- Working size 1000 × 1000 × 1700 mm (W × D × H) or custom — 180–200 °C, heat-up 15–30 min, 415 V / 380 V
- Working size 2350 × 1100 × 1800 mm (D × W × H) — electric, 29 kW, max. 250 °C, 380 V
- Internal size 4000 × 2000 × 1900 mm (D × W × H) — electric, 45 kW, 2.2 kW blower, max. 250 °C
- Chamber 2500 × 2000 × 2000 mm (D × W × H) — electric, gas, diesel or LPG, 1.1 kW motor, ventilation 1131–2565 m³/h, max. 250 °C
- Internal size 2000 × 1500 × 1700 mm (D × W × H) — electric, gas or diesel, 180–250 °C, 380 V three-phase
- Internal size 1400 × 1000 × 2000 mm (D × W × H) — electric, 15 kW, 0.75 kW blower, max. 250 °C
- Chamber 4000 × 2000 × 2200 mm (D × W × H) — electric, 62 kW, 180 °C
- Chamber 3200 × 1800 × 2000 mm (D × W × H) — electric, 51 kW, 2 × 2.2 kW motors, ventilation 4670 m³/h, 2 trolleys
- Working size 1650 × 1700 × 3200 mm (W × H × D) — 45 kW, 1.5 kW motor, max. 250 °C, 220 V / 380 V
- Internal size 2000 × 1500 × 2000 mm (external 2250 × 2100 × 2250 mm) — 30 kW stainless-steel heating tubes, 0.75 kW fan (3000 m³/h), max. 250 °C, floor rail for trolley, total 31 kW
Applications
- Motorcycle frames
- Rear ends
- Transmission housings
- ATV frames
- Wheels
- Bumpers
Technical Specifications
- Heating Source
- Electric / LPG / natural gas / diesel (model dependent)
- Working Temperature
- 180 °C typical; max. 250 °C (up to 400 °C on selected model)
- Temperature Stability
- < ±3–5 °C
- Heat-up Time
- 15–30 min (at 180 °C)
- Wall Insulation
- 100% new rock-wool board, 100–150 mm
- Voltage
- 110 V / 220 V / 380 V / 415 V, 50–60 Hz (customisable to local supply)
Values vary by model — see Available Configurations above.
Related
Related products
Powder Coating Plants
Batch Type Powder Coating Plant
Flexible, cost-effective powder coating in discrete batches for low to medium production volumes.
Powder Coating Plants
Automatic Conveyor Powder Coating Plant
Modular booths and systems for manual and automatic powder coating, with multi-cyclone powder recovery.
Powder Coating Plants
Powder Coating Booth
Fully modular powder coating booth with multi-cyclone, bag filter or cartridge filter recovery.
Enquire about Powder Curing Oven
Tell us about your application and our team will get back to you.